
Address Name- Description Access
0x934 CNTR_RX_RUNT_LO Number of received runt packets (lower 32 bits)
A run is a packet of size less than 64 bytes but greater than
eight bytes. If a packet is eight bytes or smaller, it is
considered a decoding error and not a runt frame, and the
IP core does not flag it nor count it as a runt.
RO
0x935 CNTR_RX_RUNT_HI Number of received runt packets (upper 32 bits)
A run is a packet of size less than 64 bytes but greater than
eight bytes. If a packet is eight bytes or smaller, it is
considered a decoding error and not a runt frame, and the
IP core does not flag it nor count it as a runt.
RO
0x936 CNTR_RX_ST_LO Number of received frame starts (lower 32 bits) RO
0x937 CNTR_RX_ST_HI Number of received frame starts (upper 32 bits) RO
0x938–
0x93F
Reserved
0x940 RXSTAT_REVID RX statistics module revision ID. RO
0x941 RXSTAT_SCRATCH Scratch register available for testing. Default value is 0x09. RW
0x942 RXSTAT_NAME_0 First 4 characters of IP core variation identifier string
"040gMacStats" or "100gMacStats"
RO
0x943 RXSTAT_NAME_1 Next 4 characters of IP core variation identifier string
"040gMacStats" or "100gMacStats"
RO
0x944 RXSTAT_NAME_2 Final 4 characters of IP core variation identifier string
"040gMacStats" or "100gMacStats"
RO
0x945
CNTR_RX_CONFIG Bits [1:0]: Configuration of RX statistics counters:
• Bit [2]: Shadow request (active high): When set to the
value of 1, RX statistics collection is paused. The
underlying counters continue to operate, but the
readable values reflect a snapshot at the time the pause
flag was activated. Write a 0 to release.
• Bit [1]: Parity-error clear. When software sets this bit,
the IP core clears the parity bit CNTR_RX_STATUS[0].
This bit (CNTR_RX_CONFIG[1]) is self-clearing.
• Bit [0]: Software can set this bit to the value of 1 to reset
all of the RX statistics registers at the same time. This
bit is self-clearing.
Bits [31:3] are Reserved.
RW
3-102
RX Statistics Registers
UG-01172
2015.05.04
Altera Corporation
Functional Description
Send Feedback
Kommentare zu diesen Handbüchern