Altera Avalon Verification IP Suite Bedienungsanleitung PDF herunterladen (Seite 165)

Chapter 1: SOPC Builder Tutorial 1–9

Verifying Avalon-MM Master DUT

May 2011 Altera Corporation Avalon Verification IP Suite User Guide

8. Click Finish.

9. Right-click on the component and select Rename. Rename the component name to

“slave_bfm”.

Connecting and Generating the SOPC Builder System

To connect and generate the SOPC Builder system, follow these steps:

1. Connect the master

port to the slave_bfm

Avalon slave port using the

following procedure:

a. Click on the master

port then hover in the Connections column to display

possible connections.

b. Click on the open dot at the intersection of the slave_bfm

port and the

port to create a connection.

2. Click Generate. Save the system if you are prompted to do so.

Use the read response signals Off

Use the clken signals Off

Port Polarity

Assert reset high On

Assert waitrequest high On

Assert read high On

Assert write high On

Assert byteenable high On

Assert readdatavalid high On

Assert arbiterlock high Off

Burst Attributes

Linewrap burst Off

Burst on burst boundaries only Off

Miscellaneous

Maximum pending reads 1

Timing

Fixed read latency (cycles) 0

Fixed read wait time (cycles) 1

Fixed write wait time (cycles) 0

Registered waitrequest Off

Registered Incoming Signals Off

Interface Address Type

Set slave interface address type to symbols or words WORDS

Table 1–2. Avalon-MM Slave BFM Parameter Values (Part 2 of 2)

Parameter Value

1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 177 178

Kommentare zu diesen Handbüchern

Keine Kommentare

Altera Avalon Verification IP Suite Bedienungsanleitung Seite 165

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messgeräte Altera Avalon Verification IP Suite