Altera Avalon Verification IP Suite Bedienungsanleitung PDF herunterladen (Seite 161)

Chapter 1: SOPC Builder Tutorial 1–5

Verifying Avalon-MM Slave DUT

May 2011 Altera Corporation Avalon Verification IP Suite User Guide

Connecting and Generating the SOPC Builder System

To connect and generate the SOPC Builder system, follow these steps:

1. Connect the master_bfm

Avalon-MM master port to the onchip_mem

Avalon-MM slave port using the following procedure:

a. Click on the

port then hover in the Connections column to display possible

connections.

b. Click on the open dot at the intersection of the onchip_mem

port and the

master_bfm

to create a connection.

2. Click Generate. Save the system if you are prompted to do so.

Running the Simulation

In this section you run a simulation in the ModelSim-Altera software on the testbench

that you created. To complete this simulation you use the test program provided in

the design files to provide simulation stimulus.

1. Start the ModelSim-Altera software.

2. On the File menu click Change Directory.

3. Navigate to

<working_directory>\ug_avalon_verification\sopc_builder\tutorial_master_bfm

and click OK.

4. On the Compile menu, click Compile Options.

5. Click the Ver i log & S ystem Verilo g tab.

6. In the Language Syntax box, select Use SystemVerilog and click OK.

7. On the File menu, click Load.

1 Ensure you activate your cursor on the ModelSim-Altera Transcript

window, otherwise the Load function is disabled.

8. Select script.do, and click Open. The script creates a new working library,

compiles all source files, runs simulation, and loads signals into the ModelSim

waveform viewer.

1 If you are running ModelSim-SE you must use the

-novopt

option to prevent

ModelSim from optimizing the design, making the signals specified in for the wave

viewer unavailable.

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 177 178

Keine Kommentare

Altera Avalon Verification IP Suite Bedienungsanleitung Seite 161