
Interrupts for Endpoints
Refer to Interrupts for detailed information about all interrupt mechanisms.
Table 6-9: Interrupt Signals for Endpoints
Signal Direction Description
app_msi_req
Input Application Layer MSI request. Assertion causes an MSI posted
write TLP to be generated based on the MSI configuration
register values and the app_msi_tc and app_msi_num input
ports.
app_msi_ack
Output Application Layer MSI acknowledge. This signal acknowledges
the Application Layer's request for an MSI interrupt.
app_msi_tc[2:0]
Input Application Layer MSI traffic class. This signal indicates the
traffic class used to send the MSI (unlike INTX interrupts, any
traffic class can be used to send MSIs).
app_msi_num[4:0]
Input MSI number of the Application Layer. This signal provides the
low order message data bits to be sent in the message data field of
MSI messages requested by app_msi_req. Only bits that are
enabled by the MSI Message Control register apply.
app_int_sts
Input Controls legacy interrupts. Assertion of app_int_sts causes an
Assert_INTA message TLP to be generated and sent upstream.
Deassertion of app_int_sts causes a Deassert_INTA message
TLP to be generated and sent upstream.
app_int_ack
Output This signal is the acknowledge for app_int_sts. It is asserted for
at least one cycle either when either of the following events occur:
• The Assert_INTA message TLP has been transmitted in
response to the assertion of the app_int_sts.
• The Deassert_INTA message TLP has been transmitted in
response to the deassertion of the app_int_sts signal.
UG-01145_avst
2015.05.04
Interrupts for Endpoints
6-37
Interfaces and Signal Descriptions
Altera Corporation
Send Feedback
Kommentare zu diesen Handbüchern