Altera Arria II GX FPGA Development Board, 6G Edition Bedienungsanleitung Seite 27

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 62
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 26
Chapter 2: Board Components 2–19
Configuration, Status, and Setup Elements
© July 2010 Altera Corporation Arria II GX FPGA Development Board, 6G Edition Reference Manual
Table 2–15 lists the JTAG chain header switch component reference and
manufacturing information.
PCI Express Control DIP Switch
The PCI Express control DIP switch (SW3) is provided to enable or disable different
configurations.
Table 2–16 shows the switch controls and descriptions.
Table 2–17 lists the PCI Express control DIP switch component reference and
manufacturing information.
Reset Configuration Push-button Switches
The load image push-button switch, RESET_CONFIGn (LOAD IMAGE) (PB5), is an
input to the MAX
II CPLD EPM2210 System Controller. The push-button switch forces
a reconfiguration of the FPGA from flash memory. The location in the flash memory is
based on the LED_CONFIG_LED[2:0] setting when the button is released. Valid
settings include LED_CONFIG_LED0, LED_CONFIG_LED1, or LED_CONFIG_LED2 on
the three pages in flash memory reserved for FPGA designs.
The image select push-button switch, factory (IMAGE SEL)(PB6), toggles the
LED_CONFIG_LED[2:0] sequence. Refer to
Table 2–9 for the
LED_CONFIG_LED[2:0] sequence definitions.
The MAX II reset push-button switch, MAX_RESETn (PB4), resets the MAX II CPLD
EPM2210 System Controller.
Table 2–15. JTAG Chain Header Switch Component Reference and Manufacturing Information
Board Reference Device Description Manufacturer
Manufacturer
Part Number Manufacturer Website
J9 2x4 100 mil jumper Leamax Enterprise Co. 21312*4SE www.leamax.com
Table 2–16. PCI Express Control DIP Switch Controls
Switch Schematic Signal Name Description Default
1 PCIE_PRSNT2n_x1 ON : Enable x1 presence detect
OFF : Disable x1 presence detect
ON
2 PCIE_PRSNT2n_x4 ON : Enable x4 presence detect
OFF : Disable x4 presence detect
ON
3 PCIE_PRSNT2n_x8 ON : Enable x8 presence detect
OFF : Disable x8 presence detect
ON
4 NC Not used OFF
Table 2–17. PCI Express Control DIP Switch Component Reference and Manufacturing Information
Board Reference Description Manufacturer
Manufacturer
Part Number Manufacturer Website
SW3 Four-position slide DIP switch HCH HPS604-E www.hchtwn.com.tw
Seitenansicht 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 61 62

Kommentare zu diesen Handbüchern

Keine Kommentare